A Delta airplane clipped wings with another aircraft on the runway of Minneapolis-St. Paul International Airport Thursday morning, causing delays. The two Delta planes clipped wings while taxiing on the airstrip late that morning. Delta Air Lines stated that no passengers or employees were injured in the incident. The Federal Aviation Administration (FAA) reported that the collision occurred at around 10:45 a.m. Delta Air Lines Flight 1460 was preparing to fly from Minneapolis to West Palm Beach, Florida, when the collision with Delta Air Lines Flight 1104 happened. Flight 1104 was on its way to Tucson, Arizona when the incident occurred.
Both Airbus A320s involved in the incident returned to their gates after the collision. Flight 1104 arrived in Tucson over four hours later than expected, while Flight 1460 arrived in West Palm Beach a little over 3 hours behind schedule. Delta Air Lines mentioned that Flight 1460 was traveling at a low speed when it clipped wings with the other aircraft. They apologized to their customers for the resulting delay in their travels. Both the Federal Aviation Administration and Delta are actively investigating the incident. Fox News Digital reached out to the Metropolitan Airports Commission for comment, but there has been no response from them yet.
The incident involving the two Delta aircraft at Minneapolis-St. Paul International Airport brought attention to the safety of air travel. Despite recent headlines about panels and tires falling off planes, flying is generally considered safe. The fact that no passengers or employees were injured in the wing clipping incident further reinforces the safety measures in place for air travel. Delta Air Lines immediately worked to reaccommodate their customers to their final destinations after the incident, showing their commitment to passenger safety and satisfaction.
The Federal Aviation Administration reported that the incident occurred when Delta Air Lines Flight 1460 was taxiing and its wingtip struck Delta Air Lines Flight 1104, which was pushing back from its gate. Both flights were Airbus A320s, and the collision took place at around 10:45 a.m. on Thursday, March 28. The delay in the flights caused inconvenience for passengers, with Flight 1104 experiencing a greater delay than Flight 1460. The FAA and Delta are conducting investigations to determine the causes of the incident and to prevent similar occurrences in the future.
Despite the inconvenience caused by the collision of the two Delta aircraft at Minneapolis-St. Paul International Airport, there were no injuries reported among the passengers or employees of the airline. The planes involved in the incident returned to their gates, and Delta Air Lines worked to ensure that their customers reached their final destinations. The incident highlights the importance of thorough investigation and safety measures in the aviation industry to prevent accidents and ensure the well-being of passengers and employees. The collaborative efforts of the FAA and Delta demonstrate a commitment to addressing and resolving the incident promptly.
Delta Air Lines Flight 1460 was originally scheduled to fly from Minneapolis to West Palm Beach, Florida, while Flight 1104 was bound for Tucson, Arizona. The collision occurred during taxiing when Flight 1460’s wing clipped the other aircraft, resulting in delays for both flights. Despite the delays, Delta crews worked efficiently to reaccommodate passengers and facilitate their travel to their intended destinations. The incident serves as a reminder of the importance of adherence to safety protocols and continuous monitoring of operations to prevent accidents and ensure the smooth operation of air travel. As investigations continue, the findings will likely lead to further safety enhancements to prevent similar incidents in the future and maintain the overall safety of air travel for passengers and employees.
